 Introduction |
| • |
The IEI PM I/0 module series enables you to turn your single board computer (SBC) into a PC-based data acquisition and control system. Data acquisition and control systems generally perform one or more input and output functions such as analog input, analog output, digital input, digital output, counter/timer, and industrial field bus communication. IEI PM series I/O modules have the following features: |
| |
| » |
Analog Inputs |
» |
Digital Inputs and Outputs |
| » |
Counter/Timer |
» |
CAN bus communication |
|
| • |
These days the PC-based data acquisition and control system products like industrial SBC and I/O modules have become increasingly reliable, accurate, and affordable. PC-based data acquisition and control systems are now widely used in industrial and laboratory applications such as monitoring, control, data acquisition and automated testing. |
|
 |
|
IEI PM Series Solution |
| • |
 IEI PM industrial I/O solutions provide both I/O boards and corresponding off-the-shelf best-fit single board computers (SBC), embedded chassis, and embedded systems. The following guide is provided to help you to build up your data acquisition system: |
| |
| Step 1 : Decide the type of I/O |
 |
| › |
PM-3001 : |
2 x CAN, 8 x DI, 8 x DO |
| › |
PM-3002 : |
16 x DI, 16 x DO, including 4 x 16-bit counter and 1 x Max. 100KHz timer |
| › |
PM-3003 : |
8 x DI, 8 x DO, 2 x AI |
| › |
PM-3004 : |
2 x CAN, 8 x DI, 8 x DO, 2 x AI |
|
|
| |
| Step 2 : Hardware Platform selection |
| › |
IEI KAMIO Series RISC-based SBC |
|
|
|
| |
| Step 3 : Embedded Chassis selection |
| › |
IEI EBC-1000G embedded chassis for WAFER series SBC |
|
 |
|
| |
| Step 4 : Software Support |
| › |
Embedded OS and Drivers : Supports Windows® XP Embedded or Windows® CE 5.0. |
| › |
SDK : Software Development Kits (SDK) for Windows® XP, Windows® XPe and Windows® CE 5.0 application software programming, and demo source code is provided. |
| › |
Diagnostic Utility : Utility for testing I/O modules. |
| › |
Modbus Support : IEI provides Modbus Servers for PM Sereis I/O modules to turn your device into a Modbus device and thus can easily communicate and integrate with any SCADA (Supervisory Control And Data Acquisition) software and system. |
|
|
| › |
IEI provides optional VITO Series Universal Controller products which provide diversified CPU computing power, rich built-in industrial I/O functions, and rugged embedded chassis design. Please refer to VITO Series for your data acquisition and control applications. |
| › |
IEI also provides OEM/ODM service to help customers to build their own DA&C system. |
|
| VITO Universal Controller |
 |
|
|
|
|
|
 |
|
